2.4152 - DIN 8513 Part 5
ALLOY 2.4152 - DIN 8513 Part 5
ПАРАМЕТРЫ 2.4152 - DIN 8513 Part 5
| Brand type: | 2.4152 - DIN 8513 Part 5 |
|---|---|
| Range | Rod, wire, ring, forging, shaft, sheet, strip, band, tape, pipe, offsets and flanges, various wares of industrial use on demand of a customer |
| Machining | Lathe machining, Milling, Grinding, Deep drilling: max length 9.8 m. |
| Heat treatment | Normalization, annealing, tempering, quenching, quench and temper, holding, shell hardening, carburizing |
CHEMICAL COMPOSITION 2.4152 - DIN 8513 Part 5
| Al | B | C | Co | Cr | Cu | Fe |
|---|---|---|---|---|---|---|
| < 0.05 | – | < 0.1 | < 0.1 | – | 4.0 - 5.0 | – |
| Mg | Mn | Nb | Ni | P | Pb | S |
| – | 21.5 - 24.5 | – | Остальное | < 0.02 | – | < 0.02 |
| Si | Ta | Ti | W | Zr | OT | ET |
| 6.0 - 8.0 | – | < 0.05 | – | < 0.05 | < 0.5 | – |
PHYSICAL PROPERTIES 2.4152 - DIN 8513 Part 5
| Dimension | Value | Measuring units |
|---|---|---|
| Thermal expansion | 10,1 - 17.,1 | Е-6 / K |
| Thermal conducitivity | 55,4 - 75,5 | W / m*K |
| Specific heat | 456 | J/kg*K |
| Melting point | 1370 - 1400 | ° C |
| Working temperature | 0 - 500 | ° C |
| Density | 8000 - 8000 | kg/m3 |
Total: 10
